Create Config
Edit Name Description Configiration Type Type
Home | Induction Sealers | Resources | Product Resources | Specifications - iFoiler+™

Product Specifications - iFoiler+

Inputs
Voltage 240 VAC +/- 10% 3 phase
Current 12.5 Amps @ 240 VAC
Power 5.7 kVA
Frequency 50 - 60 Hz
Interconnections
External Start Auto Start
External Stop Customer Interlock
External Reset Customer E-Stop

 

Outputs
Voltage 650 Vrms
Current 8 Amps
Power 0.7 kW - 4.50 kW
Frequency 40 - 60 kHz
Interconnections
Missing Foil Interlock Status
Loss of Seal Run Status
Stalled Bottle  

 

Dimensions (with Universal Coil)
31” (787mm) x 16” (406mm) x 17” (432mm)
iFoiler+ Universal Coil Dimensions: 30” (762mm) x 6.5” (165mm) x 7.37” (187mm)

 

Standard Features
Location Recommended for Indoor Use Only (IP51)
Maximum Ambient Temperature 122° F (50° C)
Humidity 20% to 90% non-condensing
Cap Sizes 20mm - 150mm
Cooling Air-cooled
Inverter Type Oversized IGBT
Construction NEMA 1 Heavy Gauge Corrosion-Resistant Stainless Steel
HMI Multi-lingual 5.7” full-color touchscreen
Interconnection Quick connect system
Software Upgrades Upgradeable using SD Card
Warranty 12 months parts and labor

 

Available Options
Stacked Light A three-level, high visibility, stacked light assembly that's mounted to the rear of the inverter to indicate a Run (green), Stop (red), and Loss of Seal (amber) condition
Bottle & Cap Detection System A system that utilizes the latest sensor technology to detect one of three fault conditions: stalled bottles, missing foil, or crooked cap
In-Feed Bottle Stop An air-actuated gate that stops products from entering an inactive sealing area when the sealer is: in STOP mode, the power is turned off, or there is a loss-of-seal warning active
Pneumatic Reject Works in conjunction with the Bottle & Cap Detection System to remove stalled bottles and bottles with missing foils or crooked caps
External Output Control and Feedback Control output power level of the iFoiler+ via an external analog signal from an external source
Conveyor System Conveyor is attached to the portable stand. The conveyor is a 6’ long variable speed conveyor with a 4.5" belt.
Remote Control Operator display panel mounted in a stand alone enclosure for mounting in remote locations
Light Washdown Gasketing and Shielding Kit System designed to meet IP65 specifications for foreign body and liquid protection
Zero Conveyor Speed Shutdown  
This website uses cookies to ensure you get the best experience on our website. Learn more
OK SETTINGS