You can choose to enable all three sensors, or simply pick the functions you need for your specific operation. The sensors are controlled by switches found behind the control panel which are easily activated or deactivated at your command.
An optical encoder is provided as part of the stalled bottle feature. It is mounted onto the conveyor shaft at a convenient location. The output of this encoder is also connected to the display circuit board. The encoder reads pulses of the conveyor, notifying the power board if there is a delay or the conveyor goes into stop mode, which triggers the shut down of the power supply. Encoders can be purchased separately.
For complete sealing verification, significantly lowering the risk of sending through an unsealed product, incorporate the deluxe stacked light, in-feed bottle stop and reject mechanism.
Note: Detection packages are only available on portable systems.